CT70: Wireless

This menu allows you to configure the Wi-Fi communication settings.

1. Tap the Settings button on the touchscreen of the clock.
2. Enter the administrator PIN and tap OK. The Administrator Menu will display.
3. Tap Wireless. The Available Networks screen will display.
4. If necessary, select Wi-Fi Networking On if it isn't already.
5. Tap the desired wireless network from the list. The WIFI Passcode screen will display.
6. Use the buttons on the touchscreen to enter the passcode for the wireless network.
7. Tap OK when the passcode has been entered. A confirmation message will display once connected.
8. If you want to set the clock's wireless IP address as a 'Static' IP, tap Advanced.
   1. The Network Setup screen will display. Turn off DHCP by tapping the button. The screen will refresh and the fields will become active.
   2. Tap IP address. The IP Address screen will display.
   3. Use the nmeric key pad to enter the IP address you wish to assign to the clock and tap OK.
   4. Do the same for the Subnet Mask and Gateway.
9. Once complete tap the back button to return to the default screen.

Wed 12/05/2018